Turbo – Dot Jet Valves TD118SP (solder paste)
The Turbo-Dot TD118SP is a high-performance jet valve for contactless microdispensing of solder pastes. It can dispense dots and lines with a diameter of 0.35 mm to 0.8 mm at a frequency up to 6000 points per minute (or higher depending on the consistency of solder paste)
The Turbo-Dot TD118SP jet valve has easily replaceable dispensing nozzles, tappets, and solder paste fittings. The wetted parts (parts that are in contact with the media) are separated from the actuator and therefore grant fast and easy serviceability and maintenance.
The Turbo-dot valves operate electro-pneumatically at low voltages, although the control signal can be adjusted manually. The valves have a minimal dilation time of 1.7 ms before the dispensing process can occur. The dispensing cycle ends with a discontinuation of the control signal and closing of the valve (closed without power supply).
The valves are cost-efficient and ideal for industrial applications due to their robust and proven construction.
All Turbo-Dot Jet valves are made and tested in Germany.
Download – TD118SP Data Sheet EN